If your concrete has moisture issues, this is the first step before applying any epoxy system
Ultrabarrier is a high-performance epoxy moisture barrier designed for concrete floors with rising damp or moisture issues. It seals the slab and creates a reliable base for epoxy flooring systems.
Why Use Ultrabarrier
- Stops rising damp and moisture transmission
- Suitable for damp and green concrete
- Creates a strong base for epoxy coatings
- Handles hydrostatic pressure
- Can be applied from 3°C
- Trafficable and resistant to hot tyre pick-up
When to use UltraBarrier:
- Concrete has moisture issues
- You’re coating new slabs (3–7 days old)
- You’ve had previous coating failures
- You want a long-term flooring system
Typical System Build-Up:
- Diamond grind surface
- Apply Ultrabarrier
- Apply epoxy base coat (Ultrashield)
- Apply flakes or metallic (optional)
- Seal with polyaspartic or polyurethane (optional)
Key Product Details
- Two-pack, 100% solids epoxy system
- Moisture tolerant during cure
- Bonds to new and old concrete
- Food-grade compliant
- Crack-bridging at correct thickness
- Solvent-free and non-shrinking
AREAS OF APPLICATION
- Residential garages, can be used as primer & base coat for flake flooring systems
- Driveways
- Primer under the timber flooring
- Warehouses
- Workshops
- Commercial kitchen floors
- Industrial environments such as; meat processing plants, cheese and dairy facilities, breweries, Wineries, distilleries and food packaging plants and more
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
Application Process
Surface Preparation
Prepare concrete properly to ensure maximum coating adhesion and long-term durability.
Mix Components
Mix Component A and Component B thoroughly until a consistent blend is achieved.
Apply Ultrabarrier
Apply Ultrabarrier by roller, brush, or spray. Minimum two coats are recommended.
Cure & Protect
Allow proper curing time before foot traffic or heavy vehicle use for optimal long-term performance.
