Professional Anti-Slip Epoxy Flooring System - To Achieve P4 & R11 When Applied as Directed

Transform your indoor surfaces with Australia's most trusted anti-slip epoxy flooring solution. This professional-grade system is specifically engineered to meet strict AS 4586 safety standards, delivering P4 and R11 slip resistance for maximum safety in high-risk environments.

Why Choose This Anti-Slip System?

• Meets Australian AS 4586 standards with verified P4 and R11 slip ratings when applied as directed
• Industrial-Strength Durability - 100% solids epoxy formulation withstands heavy foot traffic, machinery, and daily wear
• Superior Chemical Protection - Resistant to oils, harsh chemicals, and industrial spills
• Hygienic & Low Maintenance - Easy-to-clean surface perfect for food preparation and medical facilities
• Professional Results - Creates a seamless, safe, and attractive flooring finish
• Complete Kit - Everything you need for 50 square metres of anti-slip flooring

Perfect For These Applications

Commercial & Food Service: Commercial kitchens, food prep areas, cool rooms, restaurant back-of-house

Industrial Facilities: Warehouses, factories, loading docks, manufacturing floors

Automotive & Trade: Workshops, mechanic garages, service centres, showrooms

High-Moisture Areas: Wet areas, bathrooms, wash bays, laundries

Safety-Critical Zones: Indoor ramps, walkways, retail spaces, hospital areas

Complete Kit Includes

• 1 x 10L Ultrabarrier Epoxy Primer - Two-pack primer for maximum adhesion (view product)
• 3 x 8L Ultrashield Premium Epoxy - 100% solids epoxy for base and top coats (view product)
• 1 x 25kg Anti-Slip Media - Pre-measured aggregate for P4/R11 compliance

Optional Accessories Kit

Upgrade your kit with professional application tools to make the job easier and achieve the best results:

• 2 x 270mm Twin Roller Kits - Each kit includes 2 brushes, one heavy-duty paint tray, 2 plastic paint liners, one cage roller frame, and 2 epoxy roller covers. For a complete 4-coat system, you'll need all items included.
• 1 x Strap-On Spike Shoes - Walk freely on wet epoxy and broadcast your anti-slip media uniformly without leaving footprints.
• 1 x Large Mixer - Epoxy coating products require power mixing to achieve the desired chemical reaction. This mixer attaches to a standard drill. We recommend cleaning the mixer with thinners after each use.

Items Not Included (Available at Local Hardware Store or Bunnings)

• Aluminium Roller Extension Pole
• 4 Litres of Xylene - Add one litre of xylene to each kit and mix for 2 minutes
  

Professional Application Guide

Step 1: Surface Preparation
Diamond grind the concrete floor with coarse abrasive to remove existing coatings and create a keyed profile for optimal adhesion.

Step 2: Repair & Fill
Fill all cracks, holes, and imperfections with suitable concrete filler. Allow to cure completely.

Step 3: Prime the Surface
Apply one even coat of Ultrabarrier epoxy primer. Allow to cure as per product instructions.

Step 4: Base Coat & Aggregate Broadcast
Apply one coat of Ultrashield epoxy base coat. While still wet, evenly broadcast the entire 25kg of anti-slip media across the surface. Pro Tip: Use spike shoes to walk on wet epoxy without leaving marks.

Step 5: Remove Excess & Seal
After 24 hours, sweep and vacuum all loose anti-slip media. Apply two top coats of Ultrashield epoxy using a cross-rolling technique to fully encapsulate the aggregate.

⚠️ Critical Application Notes

• Avoid Pooling - Do not leave puddles or pooled epoxy during top coating as this will drown the aggregate and reduce slip resistance
• Complete Coverage - Ensure all anti-slip media is broadcast evenly for consistent P4/R11 rating across the entire floor
• Temperature - Apply in temperatures between 10-30°C for optimal curing
• Timeline - Allow 3-4 days to complete the full system depending on conditions

Frequently Asked Questions

What Australian Standard applies to slip resistance?
The main standard used in Australia for slip resistance of new floor surfaces is AS 4586:2013 — Slip resistance classification of new pedestrian surface materials. This standard defines how slip resistance is tested and classified using the wet pendulum test. It is referenced by the Building Code of Australia (BCA) and Standards Australia handbooks HB 197 & HB 198 when specifying minimum slip ratings for pedestrian surfaces.

What does a P4 rating mean?
Under AS 4586, surfaces are tested in wet conditions using a pendulum friction tester and given a P-rating from P0 (lowest) to P5 (highest). A P4 rating corresponds to high slip resistance under wet conditions, with a Pendulum Value (BPN) of 45-54. This means the surface has good traction when wet, making it appropriate for areas prone to moisture or frequent foot traffic.

What are the different P-rating levels?
P5 (>54 BPN): Very high slip resistance
P4 (45-54 BPN): High slip resistance
P3 (35-44 BPN): Moderate slip resistance
P2 (25-34 BPN): Low slip resistance
P1/P0 (<25 BPN): Minimal slip resistance

How is slip resistance tested?
The wet pendulum test (Appendix A of AS 4586) simulates a human heel strike with a swinging arm and rubber slider that skids across a wet surface. The test produces an average British Pendulum Number (BPN) that is used to classify the surface's slip resistance level. This is the preferred test for rating surfaces that are expected to get wet.

Where is a P4 rating typically required?
A P4 slip rating is commonly specified for pedestrian circulation areas in wet conditions, entrances and lobbies exposed to tracked moisture, ramps and stairs where occasional moisture is present, and retail corridors, healthcare areas, and similar public zones. While P5 might be required for very wet or high-risk areas like commercial kitchens or loading docks, P4 is considered sufficiently high slip resistance for many high-traffic wet zones.

What other standards relate to slip resistance?
AS 4663:2013 covers slip resistance of existing pedestrian surfaces. HB 197:1999 and HB 198:2014 are handbooks providing recommended slip resistance criteria for design and specification, helping designers choose appropriate P-ratings based on site use and risk assessment.

Technical Specifications

Coverage: 50 square metres
Slip Rating: P4 & R11 (AS 4586:2013)
Suitable For: Indoor use only
Finish: Anti-slip textured
Cure Time: 24 hours between coats, 7 days full cure
Application: Roller and broadcast method

Trusted by professional installers, facility managers, and safety-conscious businesses across Australia. Our P4 & R11 anti-slip epoxy system delivers peace of mind and long-lasting safety flooring

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.