Epoxy Flooring

Metallic Epoxy Flooring — The Complete Guide

Metallic Epoxy Flooring — The Complete Guide Metallic epoxy flooring is one of the most visually stunning floor finishes available — a high-gloss, seamless surface with a unique three-dimensional, marbled effect that looks different from every angle. Once reserved for high-end commercial spaces, metallic epoxy is now accessible for residential garages, workshops, showrooms, and retail environments. This guide covers everything you need to know — how it works, where to use it, how to apply it, and what it costs. What Is Metallic Epoxy Flooring? Metallic epoxy is a two-component, 100% solids, self-levelling epoxy resin system infused with metallic pigment powders. When applied, the pigments move and swirl through the wet epoxy, creating a unique, one-of-a-kind finish that can't be replicated exactly — every floor is different. Unlike standard epoxy coatings, metallic epoxy is both a decorative and functional floor system. It delivers: A high-gloss, mirror-like finish with depth and movement 100% solids formulation — no solvents, no shrinkage, maximum film thickness Self-levelling properties for a smooth, seamless result Superior adhesion to properly prepared concrete Scratch, chemical, UV, and moisture resistance Where Can You Use Metallic Epoxy Flooring? Metallic epoxy suits any space where aesthetics matter as much as performance: Residential garages — showroom-quality finish for car enthusiasts Home interiors — living areas, kitchens, and entertainment spaces Retail showrooms and boutiques — premium visual impact for customers Workshops and studios — durable and impressive Commercial and hospitality spaces — bars, restaurants, reception areas Metallic Epoxy vs Standard Epoxy — What's the Difference? Feature Standard Epoxy Metallic Epoxy Finish Solid colour, flat gloss 3D metallic, marbled effect Uniqueness Consistent, repeatable Every floor is one-of-a-kind Solids content 50–100% solids (can be 100%) typically high solids (often 100%) but system-dependent Self-levelling depends on product (can be self-levelling) typically self-levelling (required for flow effects) Application skill Beginner–intermediate Intermediate–advanced Best for Functional, high-traffic areas Decorative + functional spaces How to Apply Metallic Epoxy Flooring — Step by Step Step 1: Surface Preparation Proper preparation is critical. The concrete must be clean, dry, and free of contaminants. Repair any cracks using a concrete bog or epoxy filler, sand smooth, and vacuum thoroughly. Any moisture in the slab must be addressed with a moisture barrier before proceeding. Step 2: Apply the Primer Coat Apply one coat of Ultra Primer tinted with a Black or Charcoal Tint Pack. The tinted primer creates a dark base that enhances the depth and contrast of the metallic pigments above. Allow to cure fully before proceeding. Step 3: Patch and Sand After priming, patch any remaining imperfections using leftover primer mixed with Sikadur 513 Powder. Once cured, sand with 150-grit and vacuum clean. Step 4: Apply the Metallic Epoxy Coat Mix the Ultra Metallic 15L Kit thoroughly and add 3 Silver Pearl pigment packs per kit plus 1L of GP Thinners to reduce bubbles. Pour and spread using a flat magic squeegee, wearing spike shoes to avoid footprints. Work in sections of 15–20 sqm per kit, maintaining a wet edge at all times. Important tips: Do not apply if temperatures exceed 25°C Work as a team — one person mixing and pouring, others spreading and back-rolling Apply highlights sparingly (1–1.5L at a time) for the best swirl effect Remove bubbles with a solvent spray or low-pressure air blower Continuous mixing and pouring is essential to avoid colour inconsistencies Step 5: Apply a Clear Topcoat (Recommended) Once the metallic coat has cured, lightly sand with 220-grit and apply a clear protective topcoat. We recommend Xtreme polishing systems T200 clear coat  for maximum scratch, UV, and chemical resistance. As one of our customers noted: "Good product to produce high quality metallic epoxy flooring finishes. Definitely needs a T200 or polyurethane top coat to protect it." What You'll Need — Full Shopping List Ultra Primer (1 coat, tinted black or charcoal) Ultra Metallic 15L Kits — approx. 10–12 kits for 200 sqm 3 x Metallic Powder Packs per kit Magic Squeegees Spike Shoes 3 x 460mm Roller Trays and Frames 6 x Brushes White Rags Rockhard T200 Clear Topcoat How Much Does Metallic Epoxy Flooring Cost? The Ultra Metallic 15L Kit is priced at $350 AUD per kit, covering approximately 15–20 sqm per coat as a metallic floor. For a typical 40 sqm garage, budget for approximately 2–3 kits of Ultra Metallic plus primer, topcoat, and tools. The result is a floor that looks like it belongs in a luxury showroom — at a fraction of the cost of professional installation. Shop the Ultra Metallic 15L Kit — $350 AUD → Frequently Asked Questions Can I apply metallic epoxy myself? Yes — but it requires more preparation and teamwork than a standard epoxy kit. Read the full application instructions carefully, work in a team of 2–3, and avoid applying in temperatures above 25°C. How long does metallic epoxy flooring last? With proper surface preparation and a protective clear topcoat, a metallic epoxy floor can last 10–20 years in residential settings and 5–10 years in high-traffic commercial environments. Can metallic epoxy be used outdoors? Metallic epoxy is designed for indoor use. For outdoor or UV-exposed areas, a UV-stable polyaspartic topcoat is essential to prevent yellowing. What colours are available? Metallic pigment packs are available in a range of colours including Silver Pearl, Gold, Copper, and more. Multiple pigments can be combined for custom effects. Ready to Transform Your Floor? Metallic epoxy flooring delivers a finish that's truly one of a kind — no two floors are ever the same. Whether you're coating a garage, studio, or commercial showroom, the result is a floor that stops people in their tracks. Shop Ultra Metallic 15L Kit Browse All Metallic Epoxy Products Talk to our team for project advice