Introducing Stellmann Aqualine MA DIY, a water-based, single-component MethAcrylic coating. Featuring a self-crosslinking system for enhanced UV resistance and durability, this coating is a superior single-pack option ideal for indoor residential projects and light to medium-use commercial areas, both inside and out. It's touch dry in just 30 minutes and ready for foot traffic in 24 hours, with a full chemical cure in 2 days.
Aqualine MA DIY is recommended for concrete floors with low to medium wear, such as:
Please read the Data Sheet, Material Safety Data Sheet, and all precautionary labels. Key limitations include:
Store in the original 10L bucket between 5-25°C, away from direct sunlight, for up to one year.
Do not apply below +10°C (object temperature). Ideal temperature is between 15-22°C. Protect from direct sunlight during application to prevent flash curing.
Thoroughly clean the area using Stellmann Prep & Maintenance Cleaner or another alkaline-based cleaner with water and a stiff brush to remove all dirt, dust, and unwanted materials. Rinse thoroughly until all foaming stops using a hose or power washer. Allow the surface to dry completely before applying Stellmann AQUALINE MA DIY. Ensure all loose and flaking paint from previous applications is removed. Drying time depends on humidity, air and object temperature, and layer thickness (specified times assume 20°C and 65% relative humidity).
A third layer is recommended for higher traffic areas. It is recommended to use Stellmann Paint Rollers by PEKA. Always use a paint tray. Warranty is void when using other untested rollers. Contact us for spray application instructions.
Immediately wash tools thoroughly with water, using soft soap if necessary. Remove dried layers with nitro thinner.
DO NOT REUSE CONTAINER. Do NOT pour waste down the drain. Dispose of unwanted paint via special chemical waste collections (like PAINTBACK) or allow to dry on newspaper before domestic waste disposal.
Avoid ingestion, inhalation, and prolonged skin contact. Wash hands before eating, drinking, smoking, or using the toilet.
Get a durable and UV-resistant concrete floor coating with Stellmann Aqualine MA DIY. Perfect for residential and light commercial use. Achieve P3 or P4 non-slip ratings. Available now at Epoxy Warehouse. Request a quote!
Download Stellmann Documents:
Which Slip Rating Do I Need?
Slip Resistant Guidelines For Pedestrian Surfaces
Stellmann Floor Coating Maintenance Instructions
Preventable Installation Errors/Issues
Stellmann Non Slip Clear Pro Installation Manual
Safety data sheet available upon request.
Key Features
- Single-component MethAcrylic coating
- Durable thanks to MethAcrylic cross-linking
- Premium quality, water-based system
- VOC-Free
- Transparent, UV-resistant
- Use without an additional primer
- Free from saponification
- Satin finish
- Light Grey (RAL 7035) Colour
Achievable Slip Ratings
- P3 with 3% of Stellmann Non-Slip Particles
- P4 with 4.5% of Stellmann Non-Slip Particles
- Note: For a P5 slip rating, use Stellmann AQUALINE PU PRO
Recommended Uses
Aqualine MA DIY is recommended for concrete floors with low to medium wear, such as:
- Interior concrete floors
- Stairs
- Basements
- Balconies
- Verandahs
- Other outdoor residential and light commercial areas
Precautions and Limitations
Please read the Data Sheet, Material Safety Data Sheet, and all precautionary labels. Key limitations include:
- Do not apply if rain is threatening.
- Do not apply if relative humidity is above 80% or likely to exceed it shortly after application.
- Concrete must be dry with no more than 3% surface moisture.
- Avoid application in the late afternoon.
- Not suitable for wet rooms (showers, bathrooms) or areas with continuous water exposure.
- Do not apply to repelling surfaces (nano or oil-based coatings).
- Do not mix with other products.
- Removal is mechanical.
Storage
Store in the original 10L bucket between 5-25°C, away from direct sunlight, for up to one year.
Application Temperature
Do not apply below +10°C (object temperature). Ideal temperature is between 15-22°C. Protect from direct sunlight during application to prevent flash curing.
Application Guide
Surface Preparation
Thoroughly clean the area using Stellmann Prep & Maintenance Cleaner or another alkaline-based cleaner with water and a stiff brush to remove all dirt, dust, and unwanted materials. Rinse thoroughly until all foaming stops using a hose or power washer. Allow the surface to dry completely before applying Stellmann AQUALINE MA DIY. Ensure all loose and flaking paint from previous applications is removed. Drying time depends on humidity, air and object temperature, and layer thickness (specified times assume 20°C and 65% relative humidity).
Application Procedure and Equipment
- Theoretical Spreading Rate: 5 - 7 m²/kg. Practical rates vary.
- Method: Rolling, brush, or spray application.
Application - New Surface
- First Layer: Dilute with 20% water. Mix with a power mixer and apply.
- Second Layer: Dilute with 0-5% water and apply. For non-slip options, see below.
Non-Slip Finish
- P3: Add 3% of Stellmann Non-Slip Particles to the base coat.
- P4: Add 4.5% of Stellmann Non-Slip Particles to the base coat.
Renovation
- First Layer: Dilute with 0-5% water. Mix with a power mixer and apply.
- Second Layer: Dilute with 0-5% water and apply. For non-slip options, see above.
A third layer is recommended for higher traffic areas. It is recommended to use Stellmann Paint Rollers by PEKA. Always use a paint tray. Warranty is void when using other untested rollers. Contact us for spray application instructions.
Clean Up
Immediately wash tools thoroughly with water, using soft soap if necessary. Remove dried layers with nitro thinner.
Disposal
DO NOT REUSE CONTAINER. Do NOT pour waste down the drain. Dispose of unwanted paint via special chemical waste collections (like PAINTBACK) or allow to dry on newspaper before domestic waste disposal.
Handling
Avoid ingestion, inhalation, and prolonged skin contact. Wash hands before eating, drinking, smoking, or using the toilet.
Important Notes
- For bright colours (yellow, orange), an additional layer may be needed for sufficient coverage.
- Do not use for wet rooms or areas with continuous water exposure.
- Removal: mechanical.
- Do not mix with other products.
Get a durable and UV-resistant concrete floor coating with Stellmann Aqualine MA DIY. Perfect for residential and light commercial use. Achieve P3 or P4 non-slip ratings. Available now at Epoxy Warehouse. Request a quote!
Download Stellmann Documents:
Which Slip Rating Do I Need?
Slip Resistant Guidelines For Pedestrian Surfaces
Stellmann Floor Coating Maintenance Instructions
Preventable Installation Errors/Issues
Stellmann Non Slip Clear Pro Installation Manual
Download Stellmann Aqualine MA DIY Technical Datasheet.
 |
 |
Safety data sheet available upon request.
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
Real Results from Real Customers
See why tradies and homeowners choose our epoxy systems.
