Sikafloor Booster is an accelerator additive for dosing to epoxy systems.
Accelerator boosters are additives used in epoxy flooring systems to accelerate the curing or hardening process of the epoxy resin. These additives are beneficial when there is a need for a faster curing time, such as in time-sensitive projects or applications that require a quick return to service.
Sikafloor-Booster can be used with the following products to speed up the curing process:
- Sikafloor 94
- Sikafloor 160
- Sikafloor 161
- Sikafloor 264
- Sikafloor 263SL
- Sikafloor 264T
- Sikadur 33
- Sikadur 32
- Sikadur 31
USE
- As an accelerator for Sikafloor-160 -161-264 and Sikafloor-94.
- As an accelerator for Sikadur 31 – 32 and 33 epoxy mortars and pastes
CHARACTERISTICS AND ADVANTAGES
- Min. substrate temperature +10oC
- Max. substrate temperature +25oC
- Max. relative humidity 85%
- Observe dew point
- Substrate moisture content less than 4% or use Sikafloor EpoCem
- Only apply to mineral substrates
- A-component must be well mechanically stirred before being proportioned and mixed
- Sikafloor-Epoxy Booster used with any sealer top coats system will discolour in UV light
PACKAGING
5kg Jerry Can
Sikafloor Booster Datasheets
 |
 |
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
