Sikafloor-263 SL Self Levelling Epoxy Floor
Sikafloor-263 SL is a professional-grade self levelling epoxy flooring product designed for smooth and broadcast flooring systems. It is a multi-purpose, 100% solids epoxy floor system applied at approximately 2–3 mm and is used as part of Sika flooring systems including Sikafloor MultiDur ES-23, ES-24 and EB-24.
Designed for experienced flooring professionals, Sikafloor-263 SL provides a durable epoxy wearing course with good chemical and mechanical resistance and an attractive, smooth finish. It can also be used in broadcast flooring systems where additional texture and slip resistance are required.
Self Levelling Epoxy for Commercial and Industrial Floors
Sikafloor-263 SL is suitable for a range of demanding commercial and industrial flooring applications where a hard-wearing, seamless epoxy floor is required. Typical applications include
- car park decks and ramps,
- automotive workshops,
- educational trade facilities,
- laboratories and cleanrooms,
- manufacturing and printing facilities,
- aircraft storage facilities,
- stadiums,
- light to medium duty food and beverage facilities, and plantrooms.
The product is formulated as a self-smoothing epoxy wearing course and can be applied using a serrated trowel or pin rake, followed by spiked rolling to help achieve an even finish and release entrapped air from the mixed material.
Key Benefits of Sikafloor-263 SL
- Self levelling epoxy floor for smooth and broadcast systems
- Suitable for approximately 2–3 mm epoxy flooring applications
- 100% solids by volume and by mass
- Good chemical and mechanical resistance
- Suitable for commercial and industrial flooring applications
- Can be used in smooth or broadcast flooring systems
- Available in a range of standard colours
- Suitable for attractive, hard-wearing epoxy floor finishes
Important Application Information
Sikafloor-263 SL should only be applied by experienced flooring professionals following the current Sika Product Data Sheet and relevant system documentation. The concrete substrate must be sound, clean and properly prepared before application. Rough or uneven substrates may require a separate Sika levelling mortar before Sikafloor-263 SL is applied.
The product should not be applied to substrates with rising moisture. Sika specifies a substrate moisture content of less than 4% by weight for the standard application conditions stated in the Product Data Sheet. Temperature, humidity, dew point, substrate condition and preparation must all be checked before application.
Buy Sikafloor-263 SL in Australia
Epoxy Warehouse supplies Sika flooring products for professional contractors and commercial flooring applications across Australia. If you are unsure which Sika epoxy flooring system is suitable for your project, contact our team before ordering so the required primer, levelling layer, aggregate and finish coat can be selected for the application.
Sikafloor®-263 SL - Sika's Website
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
