Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.
USE
As a structural adhesive for:
- Concrete elements
- Hard natural stone
- Ceramics, fibre cement
- Mortar, Bricks, Blocks, Masonry, render etc.
- Steel, Iron, Aluminium
- Wood
- Polyester, Epoxy
For concrete repairs (interior, vertical and overhead repair of):
- Corners and edges
- Hole and void filling
- Joint arrises
Joint filling and crack sealing:
- Crack filling and sealing (non moving)
Metalwork, carpentry:
- Fixing and fastening of handrails, railings, balustrades and supports
- Fixing of window and door frames
For use in the following:
- Concrete
- Hard natural stone
- Solid rock
- Hollow and solid masonry
- Steel
- Wood
CHARACTERISTICS AND ADVANTAGES
- Can be used on damp concrete
- Excellent adhesion to the substrate
- Non-sag, also overhead
- High load capacity
- Shrinkage-free hardening
- Styrene-free
- Convenient easy mix ratio A : B = 1 : 1 by volume
COLOUR
Concrete grey
PACKAGING
Proportioned 2.7kg kit (2L)
Part A 1.35kg (1L)
Part B 1.35kg (1L)
Sikadur 33 Product and Safety Data Sheets
 |
 |
 |
Sikadur 33 - Sika's Website
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
