Sika Concrete Fix - 1ltr Kit
Sika Concrete Fix - 1ltr Kit
This product is currently out of stock, and there is no estimated restock date available. If you place an order, it will be put on backorder, and we will notify you as soon as the item becomes available again.
Description
Description
USES
- Concrete elements
- Hard natural stone
- Ceramics, fibre cement
- Mortar, Bricks, Blocks, Masonry, render etc.
- Steel, Iron, Aluminium
- Wood
- Polyester, Epoxy
For concrete repairs
Interior, vertical and overhead repair of:
▪ Corners and edges
▪ Hole and void filling
▪ Joint arrises
Joint filling and crack sealing:
▪ Crack filling and sealing (non moving)
Metalwork, carpentry:
▪ Fixing and fastening of handrails, railings, balustrades and supports
▪ Fixing of window and door frames
For use in the following:
▪ Concrete
▪ Hard natural stone
▪ Solid rock
▪ Hollow and solid masonry
▪ Steel
▪ Wood
CHARACTERISTICS AND ADVANTAGES
- Suitable as a bonding bridge adhesive paste for concrete and most building materials.
- Excellent bond strength.
- Insensitive to moisture during application and service.
- Long open time and easy to apply.
Grey
PACKAGING
1kg
Sika Concrete Fix Product and Safety Data Sheets
 |
 |
 |
Disclamer
Disclamer
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
