NuTech PaveCoat AntiSlip ( Mix-In )
Ensure optimal safety on freshly paved surfaces with NuTech PaveCoat AntiSlip Mix-In. Specifically developed to enhance the friction coefficient of all NuTech single pack floor coating systems, this mix-in additive significantly reduces slip potential in wet and dry conditions.
Key Features of AntiSlip
- Substantially improves safety on sealed surfaces under varying conditions.
- Simple mixing for uniform distribution.
- Flexible, scuff-resistant, and less abrasive surface to mitigate personal injury risks.
- Achieves Pendulum Classification of P2 or P3, meeting AS4586 & AS4663 standards.
Important Information:
- Not suitable for inclined or steep surfaces.
- Not recommended for use in 2 pack concrete finishing systems, AquaStop, or Silicon Sealer.
- NuTech recommends PolyCryl and AntiSlip Cast On for up to an R12 or P5 slip rating.
Application Guide
- Conduct a test patch to account for varying surface profiles, slopes, and access conditions affecting safety.
Application Procedure:
- Apply the first coat of the selected NuTech sealer, allowing it to dry. AntiSlip Mix In is required only in the final topcoat.
- Mix the selected NuTech Paint system according to TDS. Add AntiSlip Mix In in specified ratios, stir well, and apply as directed.
- ReCoat: Add and apply AntiSlip Mix In in the final coat only. Refer to specific NuTech system TDS for re-coat times.
Ideal for:
Ideal for wet, smooth, or foot-traffic areas requiring enhanced traction:
- Pool surrounds and patio paving
- Walkways, footpaths, and entrance foyers
- Factory loading docks and commercial floors
- Stairs, steps, and access ramps (up to 15° incline)
- Domestic driveways and car park
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
