Best seller

Nutech Agreseal Wet Look Exposed Aggregate Sealer Clear 20L

Nutech Agreseal Wet Look Exposed Aggregate Sealer Clear 20L

In Stock, ready to be shipped

out of stock

available on backorder

Non-yellowing formula that deepens aggregate color while repelling water, grease, and oil
Yields 3 to 5 m²/L per coat on new, old, or previously sealed exposed aggregate
Simple to clean and easily recoated to maintain a long-lasting, high-gloss appearance
Protects against staining, household chemicals, surface powdering, and freeze/thaw damage
Touch dry in 30 minutes with a rapid 1-hour recoat window at 25°C

Show Full Description

$257.00

inc GST

Save 0%

NuTech Agreseal Clear 20L

Agreseal - Unleash the Glossy Wet Look of Your Concrete and Aggregate Surfaces: Bring your concrete and aggregate surfaces back to life with Agreseal, the deep-penetrating, solvent-based nutech acrylic sealer that delivers a stunning glossy wet look. This easy-to-apply solution goes beyond aesthetics, enhancing your surface's performance and protecting it for years to come.

Advantages of Agreseal

Enhanced Appearance: Say goodbye to dull surfaces and hello to vibrant colors! Agreseal amplifies the natural beauty of your concrete and aggregate, showcasing their unique textures and hues.
Deeper Protection: nutech arylic concrete sealer acts as a shield, repelling water, grease, oil, and most common household chemicals. This protects your surface from everyday wear and tear, ensuring its longevity.
Durable Performance: Whether you have light vehicle traffic or frequent foot activity, Agreseal stands up to the challenge. Its resilient formula guarantees lasting performance and a surface that stays looking beautiful.
Stain Resistant: This product repels stains, making cleaning and maintenance a breeze. Enjoy a worry-free surface that's easy to keep spotless.
Non-Yellowing Finish: Unlike many sealers, nutech arylic concrete sealer maintains its crystal-clear finish, ensuring your surface's glossy wet look remains vibrant over time.
Easy Application: With a simple two-coat application process, Agreseal is ideal for DIY enthusiasts and professionals alike.

Application Guide

For New Exposed Aggregate Surfaces:

Etch the uncoated surface with Nu-EcoSafe Etch or Nu-EcoSafe Ultra Etch.
Ensure the surface is clean, dry, and free of efflorescence.
Apply a diluted first coat of nutech arylic concrete sealer mixed with up to 50% PaveCoat Thinners.
Apply a second coat of undiluted nutech arylic concrete sealer.

For Existing Exposed Aggregate:

Determine if the existing aggregate has been previously sealed.
If the existing sealer is incompatible or requires removal, use Nu-EcoSafe Strip Industrial to strip it completely.
If the existing sealer is compatible, reactivate it with Reactivating Solvent.
Clean the surface thoroughly with Nu-EcoSafe Degreaser.
Etch the uncoated surface with Nu-EcoSafe Etch or Nu-EcoSafe Ultra Etch.
Apply two coats of nutech arylic concrete sealer, following the same procedure as for new surfaces.

Nutech arylic concrete sealer is more than just a sealer; it's an investment in your outdoor space. It elevates the look and feel of your concrete and aggregate surfaces, creating a stunning and inviting environment for everyone to enjoy. Make the switch to this concrete sealer today and experience the difference!

Learn more about Nutech Agreseal.

Nutech Agreseal Technical Datasheet Download file

Nutech Agreseal Safety Datasheet Download file

Nutech Care & Maintenance Guide Download file

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Frequently Asked Questions

Do I need to thin Agreseal for the first coat?

Thinning depends on surface porosity:

Dense / Non-Porous Surfaces: Thin the first coat up to 50% with Pavecoat Thinners to ensure proper penetration.
Porous Surfaces: Apply the first coat unthinned.
Second Coat: Always apply the second coat without solvent dilution.

Can I pick up Agreseal from your warehouse?

Yes, pickup is available! While we don't hold all stock at our main warehouse, we can arrange direct pickup from Nutech’s state distribution warehouses:

VIC: Seaford (Melbourne)
NSW: Rydalmere (Sydney)
QLD: Meadowbrook (Brisbane)
WA: Cockburn Central (Perth)

Simply leave a note at checkout specifying which warehouse location you'd like to collect from, and our team will follow up shortly with stock availability and pickup instructions.

How long must new exposed aggregate cure before applying Agreseal?

Allow new concrete surfaces to cure for a minimum of 7 days prior to sealing.

What should I do if white efflorescence (salt powder) is present before sealing?

Broom over the affected dry surface with clean Pavecoat Thinners to dissolve and dissipate all salts before applying Agreseal.

What coverage can I expect from a 20L drum?

Coverage is 3 to 5 m² per litre per coat, meaning a 20L drum covers approximately 60 to 100 m² for a single coat (or 30 to 50 m² for the required 2-coat system, depending on surface porosity).