EpiMax 333WB Performance Water Epoxy Coating is a water based epoxy coating which provides excellent protection to concrete, timber,  cement sheeting and other stable surfaces. This system can be used to prepare highly durable floor and wall surfaces for a wide range of applications. It is one of the versatile proven epoxy systems available from EpiMax with the safety and environmental benefits of being hydrocarbon solvent free. These systems are an excellent alternative to  solvent-based epoxies in situations where a low odour, low VOC  and fast drying system is required.

Advantages

• Hazmat free/non flammable
• Good resistance to marking
• Water based – odourless & food safe
• Fully cross-linking system – excellent abrasion resistance
• Environmentally friendly
• Meets GBCA Low VOC standard
• Fast installation – roller or spray
• Meets HB198 to P3/P4 with suitable media
• Self priming
• Meets BCA CRF Fire standard
• Anti-dusting formulation
• Chemically resistant
• Good durability – maintenance free

Typical applications

• Vehicle workshops
• Retail service areas
• Restaurants
• Plant rooms
• Warehouses
• Dairies
• Correctional facilities
• Factories
• Distribution centres
• Shopping malls
• Chemical industries
• Automotive

Typical properties

• Shelf life: 12 months
• Light traffic: 12-24 hours at 25ºC (depends on air flow)
• Volume solids: 58%
• Recoating window: 6-12 hours at 25ºC (depends on air flow)
• Mix ratio: 1 volume Activator : 3 volumes Base • Coverage/litre – theoretical: 8-10 m2/coat
• Work time: 45 minutes at 25ºC
• Finish: Gloss
• Tack-free time: 4 hours at 25ºC (depends on air flow)
• VOC Content: <1 gm per litre
• Full cure: 7 days at 25ºC
• Reaction to fire, CRF: 11.8kW/m2

Estimating data
8 ltr EpiMax 333WB Performance Water Based Epoxy Coating = 32-40 m2 (typical 2 coats).

Colours

N14, N33, N35, N44, N45

Epimax 333WB Epoxy Product and Safety Data Sheets


 

Epimax 333WB - EpiMax's Website

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.