Nutech PaveCoat Coloured Concrete Sealer – Driveways, Paving & Garage Floors
Nutech PaveCoat is a high-performance, solvent-based acrylic concrete sealer designed to seal, colour and protect concrete surfaces. Ideal for concrete driveways, garage floors, pathways, patios, footpaths and decorative paving, it provides a durable finish for residential, commercial and light industrial applications.
Whether you're sealing a new driveway, refreshing old concrete or protecting decorative patterned paving, PaveCoat helps enhance the appearance of concrete while providing resistance to UV exposure, fading, oil and grease.
Available in clear and 29 standard colours, PaveCoat allows you to protect your concrete while achieving the finish you want. Gloss is the standard finish, with high-gloss and matt options available upon request.
Key Features
- High-performance acrylic concrete sealer for driveways, garage floors and paving
- Seals, colours and protects concrete against UV exposure, fading, oil and grease
- Available in clear, 29 standard colours and custom colour matching
- Suitable for new and existing bare concrete and compatible PaveCoat surfaces
- Gloss finish standard, with high-gloss and matt options available upon request
- Suitable for pedestrian areas and light vehicle traffic
- Can be applied by roller, brush or broom
- Australia-wide delivery and Nutech depot pickup options available
Suitable Applications
Nutech PaveCoat concrete sealer is suitable for a wide range of concrete surfaces, including:
- Concrete driveways and garage floors
- Concrete pathways, footpaths and patios
- Decorative, stencil and patterned paving
- Stamped and slate-impression concrete
- Spray paving and exposed decorative concrete
- Car parks and light commercial areas
- Tilt-slab construction and cement sheeting
Coverage & Specifications
| Specification | Details |
|---|---|
| Product type | Solvent-based acrylic penetrating concrete sealer |
| Coverage | Approximately 4–6 m² per litre, per coat |
| Coats required | 2 coats |
| Available colours | Clear and 29 standard colours; custom matching available |
| Standard finish | Gloss |
| Other finishes | High gloss and matt, upon request |
| Application methods | Roller, brush or broom |
| Pack sizes | 10L and 20L; larger packaging options may be available to order |
| Touch dry | Approximately 30 minutes at 25°C |
| Recoat time | Approximately 2 hours at 25°C |
| Full cure | 7 days |
| Recommended application temperature | 10°C–30°C |
Coverage varies depending on the concrete's porosity and surface texture. Allow at least 7 days for new concrete to cure before sealing.
Concrete Sealer for Driveways – Important Application Notes
For the best results, the concrete must be clean, dry and suitably porous before applying PaveCoat. Remove dirt, grease, oil and other contaminants, and follow Nutech's concrete preparation and application instructions.
PaveCoat is not suitable for application over standard enamel or epoxy floor coatings, or unknown existing sealers. It can be applied over compatible existing PaveCoat surfaces when correctly prepared.
Apply two even coats, following the recommended thinning instructions for the first coat and allowing at least 2 hours between coats under the specified conditions. Do not apply outside the recommended temperature range or when rain is likely within 12 hours.
Important: Allow 7 days for full curing before driving or parking vehicles on the sealed surface.
For added slip resistance, Nutech AntiSlip Mix-In can be incorporated into the final coat to achieve the specified P2 or P3 rating under the applicable testing standards. For steep driveways and inclines, a different coating system may be required.
Always refer to the current Nutech PaveCoat Technical Data Sheet and Application Guide before use.
Buy Nutech PaveCoat from Epoxy Warehouse
Epoxy Warehouse is a Nutech distributor, supplying Nutech concrete sealers and coatings across Australia. Order PaveCoat for your next driveway sealing, garage floor or decorative concrete project, with Australia-wide delivery available.
Need another Nutech product? We can also supply products from the wider Nutech range, even if they are not currently listed on our website. Contact our team to enquire about availability and pricing.
Nutech depot pickup options are available across Australia, allowing eligible orders to be collected from a suitable depot instead of delivered to your address. Contact us to confirm stock, depot availability and pickup arrangements before travelling.
Technical Documents
Refer to the Nutech PaveCoat Technical Data Sheet and Application Guide for complete preparation, thinning, application, drying and safety instructions.
Learn more about Nutech PaveCoat.
