A & I Coatings ENVIROSET 2100 is a two pack water borne epoxy coating with excellent film properties and surface hardness. It is a self priming and environmentally friendly coating system which is ideal as a floor coating, due to its excellent adhesion and chemical resistance. It can be tinted to an unlimited colour range.

USES

Concrete floors, walls and machinery in areas such as:
• Factories and warehouses
• Food and beverage industry
• Hospitals, shopping centres, schools and laboratories
• Chemical industry
• Retaining walls
• Seamless flooring
• Waterproofing concrete slabs before floor overlay

ADVANTAGES

• Can be easily brushed or rolled
• Excellent surface hardness and water resistance
• May be applied

COVERAGE

For optimal results, the theoretical coverage of ENVIROSET 2100 is 6 – 10m²/litre @ 40 to 60µm DFT (100 – 170 µm WFT) . The product is easy to mix—simply power stir Pack A and blend it with Pack B for 2 minutes. The first coat can be applied after thinning it by up to 40% with clean water, and it’s typically dry enough for light foot traffic in 3–5 hours. A second coat can be applied soon after, with a third coat if needed. Read PDS and SDS for detail.
Please  read all product, technical and safety data sheets prior to application.


Contact Epoxy Warehouse for any inquiries.

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.