Description
Sikadur 330 is a 2-component, thixotropic epoxy based impregnating resin and adhesive.
USES
Sikadur 330 is used as:
- Impregnation resin for SikaWrap® fabric reinforcement for the dry application method
- Primer resin for the wet application system
- Structural adhesive for bonding Sika® CarboDur® plates into slits
CHARACTERISTICS AND ADVANTAGES
- Easy mix and application by trowel and impregnation roller
- Manufactured for manual saturation methods
- Excellent application behaviour to vertical and overhead surfaces
- Good adhesion to many substrates
- High mechanical properties
- No separate primer required
COLOUR
Component A: white paste
Component B: grey paste
Components A + B mixed: light grey paste
PACKAGING
| 5 kg (A+B) | Pre-batched unit |
SUBSTRATE QUALITY
Substrate must be sound and of sufficient tensile strength to provide a minimum pull off strength of 1.0 N/mm2 or as per the requirements of the design specification.
See also the “Method Statement for SikaWrap® manual dry application” Ref 850 41 02.
SUBSTRATE PREPARATION
See the “Method Statement for SikaWrap® manual dry application” Ref 850 41 02.
MIXING
Pre-batched units:
Mix components A+B together for at least 3 minutes with a mixing spindle attached to a slow speed electric drill (max. 300 rpm) until the material becomes smooth in consistency and a uniform grey colour. Avoid aeration while mixing. Then, pour the whole mix into a clean container and stir again for approx. 1 more minute at low speed to keep air entrapment at a minimum. Mix only that quantity which can be used within its pot life.
Bulk packing, not pre-batched:
First, stir each component thoroughly. Add the components in the correct proportions into a suitable mixing pail and stir correctly using an electric low speed mixer as above for
pre-batched units.
Sikadur 330 LP Data Sheets
 |
 |
 |
Sikadur®-330 – Sika’s Website
Reviews
There are no reviews yet.