Elite Crete Systems E100 Series VB5 Epoxy Vapor Barrier

Description

E100-VB5™ is a 2 Gallon  high-solids, low viscosity, moisture insensitive, three-component epoxy primer system designed to eliminate outgassing from concrete substrates and seal out moisture vapor. Outperforms industry standard solvent-based primers. E100-VB5™ is formulated to penetrate the capillaries of concrete and fill pores within the surface structure, has excellent adhesion to the aggregate, and cures under dry conditions.

Advantages

• Slows hydration in new concrete, increasing strength
• Eliminate outgassing bubbles in top coats
• Seals out moisture intrusion
• Low to no odor
• VOC free
• Air releasing
• Priming green concrete surfaces (7 days depending on conditions).
• Excellent impact and chemical resistance
• Fast cure rate
• Excellent strength properties
• Meets USDA, FDA, and CFIA standards
• Protects against vapor transmission and rising damp

Uses

• REFLECTOR™ Enhancer Flooring Systems: As the epoxy vapor barrier.
• HERMETIC™ Neat Floor: As the epoxy vapor barrier.
• HERMETIC™ Flake Floor: As the epoxy vapor barrier.
• HERMETIC™ Color Quartz Floor: As the epoxy vapor barrier.
• HERMETIC™ Stout Floor: As the epoxy vapor barrier.
• HERMETIC™ Paramount Floor: As the epoxy vapor barrier.
• HERMETIC™ Paramount Heavy Duty: As the epoxy vapor barrier.

Product Properties:
Material and curing conditions at 750F/ 23°C unless noted, 50% R.H.

• Color: Amber/Green
• Viscosity @ 75° F / 23° C
  • Part A: 900 cps
  • Part B: 1000 cps
  • Mixed: 300 cps (with water added)
• Pot life: 25 minutes
• Tack free: 4 to 6 hours
• Recoat or top coat: 6 to 8 hours

Document Download

Click on the tiles below to download Elite Crete E100 Series VB5  Technical Data Sheets and Safety Data Sheets.

Elite Crete Systems Website

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.