{"product_id":"ultrashield-60sqm-three-coats-solid-colour-epoxy-flooring-kit","title":"60SQM, Three Coats, Solid Colour Epoxy Flooring Kit","description":"\u003ch2\u003eUltrashield 100% Solids Three Coat Epoxy Floor Kit – 60m²\u003c\/h2\u003e\n\u003cp\u003eThe Ultrashield 3-Coat Epoxy Floor Kit is a complete 60m² epoxy flooring system designed for garages, workshops, warehouses, commercial areas and other surfaces requiring a durable, seamless and easy-to-clean finish.\u003c\/p\u003e\n\u003cp\u003eThis system combines \u003cstrong\u003e1 × 12L Ultra Primer\u003c\/strong\u003e with \u003cstrong\u003e24L of Ultrashield 100% Solids Epoxy\u003c\/strong\u003e to provide three coats in total: \u003cstrong\u003eone epoxy primer coat followed by two solid colour epoxy coats\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe included \u003cstrong\u003eUltra Primer\u003c\/strong\u003e is particularly beneficial on porous and absorbent concrete. Its low-viscosity formulation promotes deep penetration into the substrate and strong mechanical bonding, helping create a solid foundation for the two Ultrashield coats.\u003c\/p\u003e\n\u003cp\u003eThe two Ultrashield coats then build the finished protective surface, providing excellent wear and abrasion resistance, good chemical resistance and a seamless, easy-to-maintain finish.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × 12L Ultra Primer\u003c\/strong\u003e – 100% solids epoxy primer for concrete and masonry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 × 8L Ultrashield Epoxy\u003c\/strong\u003e – 100% solids solid colour epoxy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note that, depending on stock availability, we may supply a combination of pack sizes, such as 16L and 8L. The total quantity supplied will always be 24L of epoxy, sufficient to cover approximately 60m².\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTotal system:\u003c\/strong\u003e 12L Ultra Primer + 24L Ultrashield = \u003cstrong\u003e3 coats for up to 60m²\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the 3-Coat System?\u003c\/h3\u003e\n\u003cp\u003eAdding a dedicated epoxy primer beneath two Ultrashield coats provides a more complete coating system than applying the finish coats directly to the concrete.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter substrate penetration\u003c\/strong\u003e – Ultra Primer's low viscosity helps penetrate porous concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong mechanical bonding\u003c\/strong\u003e – creates an excellent foundation for subsequent epoxy coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional coating build\u003c\/strong\u003e – two Ultrashield coats provide a more substantial finished system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent wear and abrasion resistance\u003c\/strong\u003e – designed for long-term floor protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood chemical resistance\u003c\/strong\u003e – suitable for many common chemical spill and splash situations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater and oil resistance\u003c\/strong\u003e – helps protect the concrete from common liquids and contaminants\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless finish\u003c\/strong\u003e – easy to clean and maintain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide range of colours\u003c\/strong\u003e – create a professional solid colour epoxy floor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\n\u003cp\u003eUltrashield Epoxy is suitable for a wide range of residential, commercial and industrial applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGarages and sheds\u003c\/li\u003e\n\u003cli\u003eAutomotive workshops\u003c\/li\u003e\n\u003cli\u003eWarehouses and storage areas\u003c\/li\u003e\n\u003cli\u003eCommercial workshops\u003c\/li\u003e\n\u003cli\u003eFactories and industrial environments\u003c\/li\u003e\n\u003cli\u003eShowrooms and offices\u003c\/li\u003e\n\u003cli\u003eMulti-level car parks\u003c\/li\u003e\n\u003cli\u003eCommercial and food processing areas\u003c\/li\u003e\n\u003cli\u003ePharmaceutical and cosmetic facilities\u003c\/li\u003e\n\u003cli\u003eOther areas requiring a durable, seamless epoxy floor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUltra Primer – The First Coat\u003c\/h3\u003e\n\u003cp\u003eUltra Primer is a 100% solids, two-pack epoxy primer specifically designed for concrete and masonry substrates.\u003c\/p\u003e\n\u003cp\u003eIts low-viscosity formulation provides excellent substrate penetration and strong mechanical bonding, making it especially useful on porous or absorbent concrete.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix ratio:\u003c\/strong\u003e 2:1 by volume (Part A : Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical coverage:\u003c\/strong\u003e 5–7m²\/L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life:\u003c\/strong\u003e approximately 30–45 minutes at 25°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat window:\u003c\/strong\u003e approximately 6–24 hours at 25°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure:\u003c\/strong\u003e approximately 7 days at 25°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUltrashield Epoxy – Two Finish Coats\u003c\/h3\u003e\n\u003cp\u003eUltrashield is a 100% solids epoxy floor coating designed to provide seamless and durable floor protection with excellent surface hardness, adhesion, wear resistance and resistance to water, oil and many common chemicals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix ratio:\u003c\/strong\u003e 3:1 by volume (Part A : Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical coverage:\u003c\/strong\u003e approximately 5m²\/L per coat on dense surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorous or non-skid surfaces:\u003c\/strong\u003e approximately 4m²\/L per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life:\u003c\/strong\u003e approximately 30 minutes at 20°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercoat window:\u003c\/strong\u003e 12–48 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull chemical and mechanical resistance:\u003c\/strong\u003e approximately 7 days at 23°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum service temperature:\u003c\/strong\u003e 60°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eActual coverage depends on the condition and porosity of the concrete, surface profile, application method, coating thickness and material wastage. The kit is intended for up to 60m² when applied at the appropriate coverage rates.\u003c\/p\u003e\n\u003ch3\u003eApplication System\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Prepare the Concrete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProper surface preparation is critical to the performance and longevity of any epoxy floor.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiamond grind or mechanically prepare the concrete\u003c\/li\u003e\n\u003cli\u003eRemove laitance, dust, oil, grease, curing compounds and other contaminants\u003c\/li\u003e\n\u003cli\u003eRemove loose material and existing coatings that may affect adhesion\u003c\/li\u003e\n\u003cli\u003eRepair significant cracks, spalls and surface defects before coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2. Apply Ultra Primer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply the included \u003cstrong\u003eUltra Primer\u003c\/strong\u003e as the first coat on suitable dry concrete. The primer penetrates the prepared substrate and provides a strong bonding layer for the Ultrashield coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Apply First Ultrashield Coat\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply the first Ultrashield coat evenly using a suitable roller, brush or squeegee. Maintain an even application rate and back-roll to achieve a consistent finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Apply Final Ultrashield Coat\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnce the first Ultrashield coat is ready for recoating, apply the second Ultrashield coat to complete the three-coat system.\u003c\/p\u003e\n\u003ch3\u003eMoisture \u0026amp; Rising Damp\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Ultra Primer is intended for suitable dry concrete substrates. If the floor has \u003cstrong\u003erising damp, hydrostatic pressure or significant moisture issues\u003c\/strong\u003e, a dedicated moisture barrier should be used instead of Ultra Primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltraBarrier\u003c\/strong\u003e is a 100% solids epoxy moisture and hydrostatic-pressure barrier designed for application over wet and damp concrete. It can be used as the moisture barrier layer before the subsequent epoxy flooring system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltraBarrier is not included in this kit.\u003c\/strong\u003e If required, purchase it separately and follow the UltraBarrier technical data sheet. A minimum of two coats is recommended.\u003c\/p\u003e\n\u003ch3\u003eSlip Resistance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAnti-slip media is not included with this kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf additional slip resistance is required, \u003cstrong\u003eAluminium Oxide\u003c\/strong\u003e can be purchased separately and incorporated into the appropriate epoxy coat. The correct grade should be selected according to the required slip resistance and project requirements.\u003c\/p\u003e\n\u003ch3\u003ePro Tip – Mix Epoxy in Small Batches\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo not mix the entire Part A and Part B at once.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePart A should be mixed first and then poured into a suitable measuring bucket. Add the appropriate amount of Part B to Part A and mix using the paddle attached to a suitable cordless or corded drill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMix in small batches and only prepare enough material for the coat you are currently applying.\u003c\/strong\u003e This gives you more working time before the epoxy begins to cure and makes the material easier to manage during application.\u003c\/p\u003e\n\u003cp\u003eUltrashield has an approximate pot life of \u003cstrong\u003e30 minutes at 20°C\u003c\/strong\u003e. Actual working time varies depending on temperature, mixed quantity and site conditions.\u003c\/p\u003e\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e designed for up to 60m²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem:\u003c\/strong\u003e 1 × Ultra Primer coat + 2 × Ultrashield epoxy coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimer:\u003c\/strong\u003e particularly beneficial for porous and absorbent concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture:\u003c\/strong\u003e use UltraBarrier instead of Ultra Primer where rising damp or hydrostatic moisture is present\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-slip media:\u003c\/strong\u003e not included; Aluminium Oxide can be purchased separately\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure:\u003c\/strong\u003e approximately 7 days at 23°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV exposure:\u003c\/strong\u003e Ultrashield may change in appearance when exposed to UV light. Not recommended as an exterior topcoat. An additional coat of clear Polyurethane or Polyapartic coating is required for external areas. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdditional preparation or repair products may be required depending on the condition of your concrete and the requirements of your project.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Ultrashield?\u003c\/h3\u003e\n\u003cp\u003eThe Ultrashield 60m² 3-Coat Epoxy Floor Kit combines a deep-penetrating 100% solids epoxy primer with two coats of high-performance Ultrashield epoxy.\u003c\/p\u003e\n\u003cp\u003eIt is a practical choice for customers who want strong substrate adhesion, additional coating build and a durable solid colour epoxy finish for garages, workshops, warehouses and commercial environments.\u003c\/p\u003e","brand":"Ultrakote","offers":[{"title":"N33 Lightbox Grey","offer_id":45666802860118,"sku":"60sqm-N33","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 7035 Light Grey","offer_id":45666802925654,"sku":"60sqm-RAL7035","price":965.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 7040 Window Grey","offer_id":45666802991190,"sku":"60sqm-RAL7040","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 7037 Dusty Grey","offer_id":45666803056726,"sku":"60sqm-RAL7037","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"N43 Pipeline Grey","offer_id":45666803122262,"sku":"60sqm-N43","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"N45 Koala Grey","offer_id":45666803187798,"sku":"60sqm-N45","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"N44 Bridge Grey","offer_id":45666803253334,"sku":"60sqm-N44","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 7015 Slate Grey","offer_id":45666803318870,"sku":"60sqm-RAL7015","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"N65 Graphite Grey","offer_id":45666803384406,"sku":"60sqm-N65","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"B41 Bluebell","offer_id":45666803449942,"sku":"60sqm-B41","price":965.0,"currency_code":"AUD","in_stock":true},{"title":"B64 Charcoal","offer_id":45666803515478,"sku":"60sqm-B64","price":960.0,"currency_code":"AUD","in_stock":true},{"title":"N54 Basalt","offer_id":45666803581014,"sku":"60sqm-N54","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"N61 Black","offer_id":45666803646550,"sku":"60sqm-N61","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"N14 White","offer_id":45666803712086,"sku":"60sqm-N14","price":955.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 6010 Grass Green","offer_id":45666803777622,"sku":"60sqm-RAL6010","price":995.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 5005 Signal Blue","offer_id":45666803843158,"sku":"60sqm-RAL5005","price":965.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 5015 Sky Blue","offer_id":45666803908694,"sku":"60sqm-RAL5015","price":995.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 3009 Oxide Red","offer_id":45666803974230,"sku":"60sqm-RAL3009","price":965.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 3003 Ruby Red","offer_id":45666804039766,"sku":"60sqm-RAL3003","price":1035.0,"currency_code":"AUD","in_stock":true},{"title":"RAL 1033 Dahlia Yellow","offer_id":45666804105302,"sku":"60sqm-RAL1033","price":1035.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/4836\/8214\/files\/ultrashiel-lightbox-grey-16l.png?v=1775713104","url":"https:\/\/epoxywarehouse.com.au\/products\/ultrashield-60sqm-three-coats-solid-colour-epoxy-flooring-kit","provider":"Epoxy Warehouse | Epoxy Floor Coating Supplier","version":"1.0","type":"link"}