{"product_id":"tremco-euco-qwikstitch-concrete-repair-mortar","title":"Tremco EUCO QWIKstitch Concrete Repair Mortar","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003e\u003cstrong\u003eTremco EUCO QWIKstitch\u003c\/strong\u003e is an ultra-low viscosity, two-component hybrid urethane repair liquid designed for rapid concrete crack and spall repairs. When combined with blended aggregate, \u003cstrong\u003eEUCO QWIKstitch\u003c\/strong\u003e becomes a tough repair mortar suitable for durable repairs in concrete pavements, hardstands, and industrial surfaces.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSupplied by \u003cstrong\u003eEpoxy Warehouse Australia\u003c\/strong\u003e, EUCO QWIKstitch provides a fast-curing repair solution where minimising downtime is important. Its rapid cure properties allow repaired areas to be opened to heavy traffic in less than one hour when installed under suitable conditions.\u003c\/p\u003e\n\u003cp\u003eThe low viscosity repair liquid can be applied neat or combined with aggregate to create a repair mortar for different concrete repair requirements. \u003cstrong\u003eEUCO QWIKstitch\u003c\/strong\u003e can be used across a wide application temperature range from -18°C to 43°C and does not require priming before application.\u003c\/p\u003e\n\u003ch3 class=\"PDq2pG_selectionAnchorContainer\"\u003eKey Benefits of EUCO QWIKstitch\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-low viscosity polyurethane hybrid repair system\u003c\/li\u003e\n\u003cli\u003eVery fast curing repair solution\u003c\/li\u003e\n\u003cli\u003eCan reopen areas to traffic in as little as 30 minutes\u003c\/li\u003e\n\u003cli\u003eNo priming required\u003c\/li\u003e\n\u003cli\u003eLow VOC formulation with no solvent odour\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete and asphalt repairs\u003c\/li\u003e\n\u003cli\u003eCan be applied neat or with blended aggregate\u003c\/li\u003e\n\u003cli\u003eWide application temperature range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"PDq2pG_selectionAnchorContainer\"\u003eWhere Can EUCO QWIKstitch Be Used?\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEUCO QWIKstitch\u003c\/strong\u003e is designed for rapid repair applications including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCracked concrete surfaces\u003c\/li\u003e\n\u003cli\u003eInterior and exterior concrete repairs\u003c\/li\u003e\n\u003cli\u003eSpalled or damaged floor joints\u003c\/li\u003e\n\u003cli\u003eIndustrial floor repairs\u003c\/li\u003e\n\u003cli\u003eWalkway repairs\u003c\/li\u003e\n\u003cli\u003eParking structure repairs\u003c\/li\u003e\n\u003cli\u003eConcrete bridge repairs\u003c\/li\u003e\n\u003cli\u003eAirport runway and taxiway repairs\u003c\/li\u003e\n\u003cli\u003eCold room floor and entrance repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackaging \u003c\/h3\u003e\n\u003cp\u003e3 Component Unit containing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eResin (Part A): 2.31lts\u003c\/li\u003e\n\u003cli\u003eHardener (Part B): 2.31lts\u003c\/li\u003e\n\u003cli\u003eAggregate (Part C): 20kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eColour\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart A: Clear\/Amber\u003c\/li\u003e\n\u003cli\u003ePart B: Black\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMixed: Grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage\/Yield:\u003c\/strong\u003e Approximately 12.31lts per unit\u003c\/p\u003e\n\u003ch3 class=\"PDq2pG_selectionAnchorContainer\"\u003eSurface Preparation\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCrack Repairs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete must be a minimum of 21 days old.\u003c\/li\u003e\n\u003cli\u003eClean cracks using a diamond blade, wire brush, or wire wheel.\u003c\/li\u003e\n\u003cli\u003eRemove loose concrete, dirt, oil, dust, laitance, and contaminants.\u003c\/li\u003e\n\u003cli\u003eClean prepared cracks using oil-free compressed air or industrial vacuum.\u003c\/li\u003e\n\u003cli\u003eEnsure surfaces are clean and dry before application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpall Repairs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove loose, delaminated, and weak concrete.\u003c\/li\u003e\n\u003cli\u003eRemove oil, grease, laitance, and contaminants.\u003c\/li\u003e\n\u003cli\u003eMark repair areas clearly.\u003c\/li\u003e\n\u003cli\u003eSaw-cut concrete around repair areas to minimum 10mm depth.\u003c\/li\u003e\n\u003cli\u003eCuts should be perpendicular to the surface to avoid feather edging.\u003c\/li\u003e\n\u003cli\u003ePrepare surfaces to achieve clean, sound, rough concrete.\u003c\/li\u003e\n\u003cli\u003eEnsure all surfaces are clean and dry before application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"PDq2pG_selectionAnchorContainer\"\u003eMixing Instructions\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eShake Part A and Part B containers before use.\u003c\/li\u003e\n\u003cli\u003ePour Part A into a clean mixing bucket.\u003c\/li\u003e\n\u003cli\u003eAdd Part B and mix using a drill and paddle mixer for approximately 20 seconds.\u003c\/li\u003e\n\u003cli\u003eSlowly add Aggregate Part C.\u003c\/li\u003e\n\u003cli\u003eContinue mixing until aggregate is fully wetted (approximately 30 seconds).\u003c\/li\u003e\n\u003cli\u003eMix only the amount that can be used within the working time.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 class=\"PDq2pG_selectionAnchorContainer\"\u003eApplication Instructions\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlace mixed material immediately after mixing.\u003c\/li\u003e\n\u003cli\u003eWorking time is approximately 2–3 minutes at 24°C.\u003c\/li\u003e\n\u003cli\u003eMaterial may be used neat or combined with aggregate depending on repair requirements.\u003c\/li\u003e\n\u003cli\u003eRepair mortar should be installed between 10mm and 76mm per lift.\u003c\/li\u003e\n\u003cli\u003eAfter the repair becomes tack-free (approximately 10 minutes), finish flush with the substrate using a diamond grinding disc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"PDq2pG_selectionAnchorContainer\"\u003eApplication Conditions\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCondition EUCO QWIKstitch material between 16°C and 27°C before use.\u003c\/li\u003e\n\u003cli\u003eApplication temperature range: -18°C to 43°C.\u003c\/li\u003e\n\u003cli\u003eWarmer material or hot concrete will accelerate curing.\u003c\/li\u003e\n\u003cli\u003eCold material or cold conditions will delay curing.\u003c\/li\u003e\n\u003cli\u003eConduct a small test application where jobsite conditions may affect curing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"PDq2pG_selectionAnchorContainer\"\u003eImportant Product Notes\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWet substrate or wet aggregate can cause foaming and reduce repair performance.\u003c\/li\u003e\n\u003cli\u003eNeat material may discolour when exposed to UV light.\u003c\/li\u003e\n\u003cli\u003eRepair mortar thickness should be between 10mm and 76mm per lift.\u003c\/li\u003e\n\u003cli\u003eAlways refer to the Safety Data Sheet before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always refer to the latest EUCO QWIKstitch Product Datasheet and Safety Data Sheet for complete technical information, application requirements, limitations, and safety instructions before use.\u003c\/em\u003e\u003c\/p\u003e","brand":"Tremco","offers":[{"title":"(Part A + Part B) – 4.99kg","offer_id":45517802242134,"sku":"693Q95KT","price":252.93,"currency_code":"AUD","in_stock":true},{"title":"(Part A + Part B + Aggregate C) – 24.99kg","offer_id":45517802274902,"sku":"693Q95KT-1","price":295.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/4836\/8214\/files\/EUCOQWIKstitch.jpg?v=1785898371","url":"https:\/\/epoxywarehouse.com.au\/products\/tremco-euco-qwikstitch-concrete-repair-mortar","provider":"Epoxy Warehouse | Epoxy Floor Coating Supplier","version":"1.0","type":"link"}