{"product_id":"flowcrete-flowcoat-op-double-garage-epoxy-flooring-package-2-x-10kg","title":"Flowcrete Flowcoat OP Double Garage Epoxy Flooring Package","description":"\u003ch2\u003eFlowcrete Flowcoat OP Double Garage Epoxy Floor Package – 2 x 10kg\u003c\/h2\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRODUCT LAUNCH SPECIAL – Immediate pickup available from our Silverwater or Rydalmere locations, with Australia-wide delivery available.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGet a professional-grade Flowcrete Flowcoat OP epoxy floor coating system for your garage, workshop or commercial floor with this special double garage package. The package includes 2 x 10kg Flowcoat OP epoxy kits in your choice of Light Grey or Bridge Grey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Price: $499\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo 10kg kits normally cost $580 when purchased separately at $290 each. This package is available for \u003cstrong\u003e$499, saving $81\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdditional 10kg kits are available for $245 each when purchased with this package. Contact us, and we can provide a custom quote with special pricing for additional kits.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 10kg Flowcrete Flowcoat OP epoxy kits\u003c\/li\u003e\n\u003cli\u003ePre-tinted epoxy coating\u003c\/li\u003e\n\u003cli\u003eChoice of Light Grey or Bridge Grey\u003c\/li\u003e\n\u003cli\u003eProfessional-grade, low-VOC epoxy resin coating\u003c\/li\u003e\n\u003cli\u003eSuitable for smooth or specified non-slip Flowcoat OP systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e Primer, slip-resistant aggregate, repair products or application equipment.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Flowcoat OP?\u003c\/h3\u003e\n\u003cp\u003eFlowcrete Flowcoat OP is a hard-wearing, low-VOC epoxy floor coating designed for demanding industrial, commercial and workshop environments. When installed as part of the appropriate Flowcoat OP system, it produces a seamless, protective and easy-to-maintain floor surface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard wearing\u003c\/strong\u003e – designed for demanding flooring environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion resistant\u003c\/strong\u003e – tested to BS8204-2 with an AR2 classification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistant\u003c\/strong\u003e – provides resistance to a range of chemical exposure once fully cured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC\u003c\/strong\u003e – VOC content below 140 g\/L according to ASTM D2369-10:2015.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpermeable\u003c\/strong\u003e – nil water permeability reported under the Karsten Test.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to maintain\u003c\/strong\u003e – seamless and hygienic epoxy surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlip-resistant options\u003c\/strong\u003e – specified aggregate systems can provide higher levels of slip resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlowcoat OP System \u0026amp; Coverage\u003c\/h3\u003e\n\u003cp\u003eFlowcoat OP can be installed as a smooth or non-slip system. The required material quantity depends on the selected system.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003cth\u003eCoats\u003c\/th\u003e\n\u003cth\u003eAggregate\u003c\/th\u003e\n\u003cth\u003eSlip Rating\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.3mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSmooth Gloss\u003c\/td\u003e\n\u003ctd\u003e0.2 + 0.2 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eP1\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.35mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLight Non-Slip\u003c\/td\u003e\n\u003ctd\u003e0.2 + 0.2 kg\/m²\u003c\/td\u003e\n\u003ctd\u003e60 Mesh White Aluminium Oxide\u003cbr\u003e0.01 kg\/m²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e\u0026gt;P3\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.5mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHeavy Non-Slip\u003c\/td\u003e\n\u003ctd\u003e0.25 + 0.55 kg\/m²\u003c\/td\u003e\n\u003ctd\u003e0.6–1mm Slip Resistant Aggregate\u003cbr\u003e2.0 kg\/m²\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e\u0026gt;P4\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eApproximate smooth-system coverage: The 20kg supplied in this package provides approximately \u003cstrong\u003e50 m²\u003c\/strong\u003e at the specified two-coat consumption of 0.4 kg\/m².\u003c\/p\u003e\n\u003cp\u003eActual coverage varies with concrete porosity, surface profile, preparation, application method and wastage. Non-slip and higher-build systems require different material quantities.\u003c\/p\u003e\n\u003ch3\u003eRecommended Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDouble garage floors\u003c\/li\u003e\n\u003cli\u003eResidential garages\u003c\/li\u003e\n\u003cli\u003eHome workshops\u003c\/li\u003e\n\u003cli\u003eAutomotive workshops\u003c\/li\u003e\n\u003cli\u003eCommercial workshops\u003c\/li\u003e\n\u003cli\u003eWarehouses\u003c\/li\u003e\n\u003cli\u003eIndustrial facilities\u003c\/li\u003e\n\u003cli\u003eMaintenance areas\u003c\/li\u003e\n\u003cli\u003eService areas\u003c\/li\u003e\n\u003cli\u003eCommercial concrete floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Guide\u003c\/h3\u003e\n\u003cp\u003ePrepare the Concrete: The substrate must be sound, dry, clean and free from laitance, dust, oil, grease and other contamination. Concrete or screed should have a minimum compressive strength of \u003cstrong\u003e25 N\/mm²\u003c\/strong\u003e. Mechanically prepare the surface using enclosed light shot blasting or \u003cstrong\u003ediamond grinding to a minimum CSP2\u003c\/strong\u003e where specified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. Check Moisture: \u003c\/strong\u003eSubstrate moisture should not exceed \u003cstrong\u003e75% RH\u003c\/strong\u003e in accordance with ASTM F2170 \/ AS1884:2012. Slab-on-ground concrete should have an effective damp-proof membrane.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Repair and Clean: \u003c\/strong\u003eRepair cracks, damaged areas and surface defects using suitable compatible repair materials such as \u003ca href=\"https:\/\/epoxywarehouse.com.au\/products\/flowcrete-flowtex-f1-epoxy-resin-based-mortar-20kg-kit\" rel=\"noopener\" target=\"_blank\"\u003eFlowtex F1 Mortar\u003c\/a\u003e.  After mechanical preparation, thoroughly vacuum the floor to remove dust and loose particles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Apply Primer Where Required: \u003c\/strong\u003eFlowprime AU is required only where specified, such as on porous substrates. Follow the current \u003ca href=\"https:\/\/epoxywarehouse.com.au\/products\/flowcrete-flowprime-au-epoxy-primer-18kg-kit\" rel=\"noopener\" target=\"_blank\"\u003eFlowprime AU\u003c\/a\u003e technical data sheet for mixing, application rates and overcoat requirements. Where primer is used, Flowcoat OP should be applied within the specified overcoat window. Flowcrete's supplied specification states a maximum of \u003cstrong\u003e24 hours at 20°C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Mix Flowcoat OP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlowcoat OP is a two-component epoxy system supplied in pre-weighed packs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStir Base A to re-disperse any settlement.\u003c\/li\u003e\n\u003cli\u003eAdd Hardener B to Base A.\u003c\/li\u003e\n\u003cli\u003eMix using a slow-speed drill with a helical mixer head for approximately 90 seconds.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive air entrainment during mixing.\u003c\/li\u003e\n\u003cli\u003eAdd between 2 - 7% (if required depending on conditions) Xylene and mix for a further 30 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt approximately 20°C, mixed material should be used within approximately 20 minutes. Working time decreases at higher temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. Apply the Coating: \u003c\/strong\u003eApply Flowcoat OP using the appropriate \u003ca href=\"https:\/\/epoxywarehouse.com.au\/products\/unipro-460mm-epoxy-roller\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003e10–12mm nap roller\u003c\/strong\u003e\u003c\/a\u003e and\/or squeegee at the specified coverage rate.\u003c\/p\u003e\n\u003cp\u003eFor the standard smooth system, apply:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFirst coat: \u003cstrong\u003e0.2 kg\/m²\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecond coat: \u003cstrong\u003e0.2 kg\/m²\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDo not use a microfibre roller\u003c\/strong\u003e where prohibited by the manufacturer's application specification.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6. Apply the Second Coat: \u003c\/strong\u003eApply the second coat within the manufacturer's specified overcoat window. At 20°C, the maximum stated overcoat time is \u003cstrong\u003e24 hours\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7. Allow to Cure: \u003c\/strong\u003eCuring times vary with temperature and conditions. Refer to the curing table below before allowing foot or vehicle traffic onto the finished floor.\u003c\/p\u003e\n\u003ch3\u003eRecommended Equipment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10–12mm nap roller\u003c\/li\u003e\n\u003cli\u003eSlow-speed drill with helical mixer\u003c\/li\u003e\n\u003cli\u003eSqueegee\u003c\/li\u003e\n\u003cli\u003eDigital scales where accurate weight measurement is required\u003c\/li\u003e\n\u003cli\u003eIndustrial vacuum for dust removal\u003c\/li\u003e\n\u003cli\u003eSpike shoes where required for the selected system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Application Conditions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplication temperature: 5°C–35°C.\u003c\/li\u003e\n\u003cli\u003eSubstrate temperature must remain at least 3°C above dew point.\u003c\/li\u003e\n\u003cli\u003eTemperature should not fall below 5°C during the first 24 hours.\u003c\/li\u003e\n\u003cli\u003eMaximum overcoat time at 20°C: 24 hours.\u003c\/li\u003e\n\u003cli\u003eAvoid excessive airflow during application.\u003c\/li\u003e\n\u003cli\u003eMaintain adequate ventilation.\u003c\/li\u003e\n\u003cli\u003eProtect the finished floor from water for 5 days at 20°C.\u003c\/li\u003e\n\u003cli\u003eFlowcoat OP is \u003cstrong\u003enot UV stable \u003c\/strong\u003eunless otherwise specified and may discolour when exposed to UV. UV Stable clear topcoat like \u003ca href=\"https:\/\/epoxywarehouse.com.au\/products\/flowcrete-flowseal-uv-satin-polyurethane-sealer\" target=\"_blank\" rel=\"noopener\"\u003eFlowseal UV\u003c\/a\u003e is recommended for external areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow to Apply Flowcoat OP Epoxy Floor Coating:\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1200\" height=\"500\" src=\"https:\/\/www.youtube.com\/embed\/kqucZ8BkYo0\" title=\"Flowcrete Epoxy Flooring - Tremco Training - How to Apply Epoxy Resin Roll Coat\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Flowcrete","offers":[{"title":"N44 Bridge Grey","offer_id":45680285188182,"sku":"FC-OP-N44-20KG","price":499.0,"currency_code":"AUD","in_stock":true},{"title":"Light Grey","offer_id":45680285220950,"sku":"FC-OP-LIGHT GREY-20KG","price":499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/4836\/8214\/files\/Flowcrete_OP_Double_garage_package.jpg?v=1788229508","url":"https:\/\/epoxywarehouse.com.au\/products\/flowcrete-flowcoat-op-double-garage-epoxy-flooring-package-2-x-10kg","provider":"Epoxy Warehouse | Epoxy Floor Coating Supplier","version":"1.0","type":"link"}