Ultrakote ULTRABARRIER Epoxy Coating 10L

Description

ULTRABARRIER is a two component, 100% Solids, slow cure, Food grade epoxy coating system with good chemical resistance and protection against rising dampness and negative pressure in the concrete.

BENEFITS / FEATURES

• Approved for use in contact with food and portable water
• Excellent Bond to damp concrete and good adhesion to old concrete
• Moisture tolerant during cure and blooming
• Low temperature curing property (can cure in temperatures of 3+ degrees)
• Vehicle trafficable, resists hot tyre pick up and has excellent mechanical properties
• Can be applied over a 3 days old concrete as a green concrete primer prior to applying epoxy floor coating products
• Curing time can be reduced to 2 hours when used in conjunction with ULTRAKOTE Epoxy Accelerator
• Exhibits good flexibility and Crack-bridging ability when applied at 500 Microns DFT
• Solvent free and non-shrinking product

AREAS OF APPLICATION

• Residential garages, can be used as primer & base coat for flake flooring systems
• Driveways
• Primer under the timber flooring
• Warehouses
• Workshops
• Commercial kitchen floors
• Industrial environments such as; meat processing plants, cheese and dairy facilities, breweries, Wineries, distilleries and food packaging plants and more

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.