TempSpray H326

Description

TempSpray H326

Part Number: 2311661

All heating systems are warmed up by an electric heating element, which is located inside the hose, directly in the paint flow. The paint material is heated to the required temperature uniformly along the whole length of the hose (smoothly regulated from 20° to 60° C). This leads to a drop in the viscosity and thus an improvement in the application of paint material. Due to be heated up in the heating hose the coating materials are always at the ideal working temperature – regardless of seasonal temperature fluctuations!

• Ideal for any painting and undercoating jobs
• Easily adapted to all Airless units

To make coating materials sprayable they usually have to be diluted. Thanks to the heating hose system not only can the solvents be reduced but also the applied film thicknesses can be increased. These are only a few advantages that show these innovative systems.

• Constant paint temperature even at low outside temperatures.
• Considerably better working of high viscosity coating materials.
• Increase in the atomisation quality.
• Excellent edge coverage.
• Increase in the flow characteristics.
• Paint savings due to minimised overspray.
• Lower equipment wear since a lower material pressure is needed.

• Temperature control from 20°-60° C
• DN10 / 30 m PU Sheating hose

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.