JUSTSEALIT Shield

Description

JUSTSEALIT Shield-Superior Protection for Stone and Concrete

JUSTSEALIT Shield is the ultimate sealant for safeguarding natural stone and concrete surfaces. Scientifically formulated, it offers complete breathability while resisting oil and waterborne stains, ensuring your surfaces stay clean and free from contaminants. Its advanced properties enhance durability and make maintenance effortless, making it perfect for high-traffic areas and kitchen benchtops.

JUSTSEALIT Shield Application Instructions

1. Apply one wet-on-wet coat (two coats applied at once) with a low-pressure sprayer or lambswool applicator.
2. Apply left to right, then immediately in the opposite direction to ensure full coverage.
3. Avoid pooling or leaving excess product on the surface.
4. Use undiluted, and ensure the surface temperature is between 10–30°C.
5. For optimal performance, use within 7 days of opening.

JUSTSEALIT Shield Safety and Cautions

• Always test on an inconspicuous area and wait 24 hours to ensure desired results.
• Verify suitability for the intended purpose before full application.
• This product does not protect against acid etching.

Learn more about Epoxy Warehouse.

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.