Dr Schutz PU Sealer Polyurethane Sealer- 5.5L

Description

**These items are for shipping only and stock isn’t available in Sydney please contact our store to confirm availability.**

Dr. Schutz PU Sealer- Water Based Polyurethane Sealer for Long-Term Floor Protection

Special water-based 2-part polyurethane permanent sealer for the long-term protection of floors. Only for professional users. Reduces dirt adhesion and the time needed for day-to-day maintenance.

• Hardwearing sealer film
• Excellent elasticity
• Good resistance against colorless chemicals
• Easy and safe to apply with excellent adhesion
• High solids content
• UV Stable
• Anti-slip classification R9
• Tested according to DIN 18032-2 and DIN EN 14904, suitable for sports floors (satin)
• Very low emission (EMICODE: EC1 R)

Gloss grade at 60°:

• Gloss: 70-85
• Satin: 10-15
• Mat: 5-7

The gloss grade can vary from lab values depending on the conditions in actual buildings.

AREAS OF APPLICATION

• Floor coverings made of PVC and LVT with smooth, or slightly structured, grained surfaces.
• Linoleum floors, for open-pored linoleum after priming with Dr. Schutz Lino Primer.
• Non-absorbent stone and tile sub-surfaces after priming with Dr. Schutz SuperBond.
• Epoxy and PU floors.
• Wood and cork floors after priming with Strato Classic Prime 200.

Suitability for safety floorings, more structured surfaces, and studded floors must be ascertained in the specific building before use.

APPLICATION:

Shake up Dr. Schutz PU Sealer / Waxnomor vigorously before adding the Crosslinker. Add Crosslinker M (for satin, mat), or Crosslinker G (for gloss) to the base lacquer in a ratio of 10:1 and immediately mix thoroughly and evenly. Allow the mixture to settle for 10 minutes, then stir again and use it. Do not mix more than can be used up within 4 hours (at 20°C). Apply PU Sealer / Waxnomor evenly (at min. 15°C) onto the previously prepared subsurface with the Dr. Schutz Aquatop Roller in two coats.

Please note:

• The surface must be professionally prepared and in a clean, dry condition free of oil, wax, and dust (**).
• Wood, open-pored linoleum, and decorative screed floors must be primed before applying Dr. Schutz PU Sealer / Waxnomor.
• Floor and material temperature must not fall below +15°C during application and drying time.
• The technical rules are to be observed.

CONSUMPTION:

Per coating approx. 20 m²/l (50 ml/m²). On wood, cork, or decorative screed floors approx. 10-12m²/l (80-100 ml/m²) per coating.
In the case of a very absorbent sub-surface, higher consumption is possible, depending on absorbency.

DRYING TIME:

Can be carefully walked on and worked on for the second coating after approx. 2 hours, but no longer than 12 hours after the first coat. In the case of a longer interim drying time, the entire surface must first be abraded with a 3M SPP Pad or Glomesh Floor Prep Pad (Single disc speed to be <150rpm). Can be walked on carefully 12 hours after the last sealing coat. After 24 hours approx. 80% of the durability has been achieved. After 7 days the full durability and chemical resistance of the product is provided (based on conditions of 20°C, 50% relative humidity, and sufficient ventilation).
Low temperatures, high humidity, and poor ventilation can prolong the drying time. Refrain from laying down carpets in the first 10-14 days. Furniture can be carefully placed after 24 hours. The area must not be wet mopped in the first three days.

STORAGE:

Protect against frost. Store in a cool, dry place. Will keep for 12 months in unopened, original canister from the date of manufacture. Keep coating materials out of the reach of children.
When stored in varying temperatures and/or in an opened canister, dried parts can form. If so, sieve these out before using.

Contact us now to confirm product availability and get expert guidance on how Dr. Schutz Polyurethane floor Sealer can help protect and maintain your floors. Ensure your flooring investment is secure with this high-quality, long-lasting solution!

Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Learn more about Epoxy Warehouse

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.