Dr Schutz PU Anticolor Floor Sealer- 5.5L

Description

**These items are for shipping only and stock isn’t available in Sydney please contact our store to confirm availability.**

Dr. Schutz PU Anticolor – Advanced Chemical & Stain Protection Sealer

Dr. Schutz PU Anticolor provides advanced protection against chemicals, stains, and heavy wear with a two-part polyurethane formula. Available in matte and satin finishes, this sealer is ideal for areas exposed to spills and frequent cleaning, like healthcare facilities and salons. It prevents dirt build-up, making floors easier to maintain and keeping them looking fresh. Water-based 2part-polymer-sealer with especially high cross-linking density and therefore high resistance to coloured dyes, plasticizers and chemicals. Only for professional use. Reduces dirt adhesion and the time needed for day-to-day maintenance. Hard-wearing sealer-film, excellent elasticity. Easy and safe to apply with excellent adhesion. High solids content.

Suitable For:

Buildings in which a higher level of chemicals is used, e.g. hairdresser’s salons and medical areas (for highest stain resistance we recommend the semi gloss version). If in a specific building the highest possible hard-wearing sealer-film is the priority, rather than higher resistance to chemicals, then it is preferable to use Dr. Schutz PU Sealer.

– Floor coverings made of PVC and LVT with smooth, or slightly structured, grained surfaces.
– Linoleum floors, for open-pored linoleum after priming with Dr. Schutz Lino Primer
– Coating of decorative screed floors, which have been tested and approved by us, after priming with Dr. Schutz Primer for Decorative Screed Floors.
– Non-absorbent stone and tile sub-surfaces after priming with Dr. Schutz Superbond.
– Rubber floors (*).
– Cast floors based on epoxy

Suitability for safety floorings, more structured surfaces and studded floors must be ascertained in the specific building before use .

Application:

Shake the lacquer vigorously before adding the crosslinker. Add Crosslinker M to the lacquer in a ratio of 5:1 and immediately mix thoroughly and evenly. Allow the mixture to settle for 10 minutes, then stir again and use it. Do not mix more than can be used up within 2 hours. Apply PU Anticolor evenly at min. 15 °C onto the thoroughly prepared subsurface (Please pay attention to our Technical Information „ Preparation of subsurfaces“) with the Dr. Schutz Aquatop Roller in two coats.

Please note:
– The surface must be professionally prepared and in a clean, dry condition free of oil, wax and dust.
– Wood, open-pored linoleum and decorative screed floors must be primed before applying
Dr. Schutz PU Anticolor / Marknomor.
– Floor and material temperature must not fall below +15°C during application and drying time.
– The technical rules are to be observed.

Coverage

Per coating approx. 50 ml/m² (20 m²/l). On wood, cork or decorative screed floors approx. 80-100 ml/m² (10-12m²/l) per coating.
In the case of a very absorbent sub-surface, higher consumption is possible, depending on absorbency.

Curing

Can be carefully walked on and worked on for the second coating after approx. 5 hours, but no longer than 24 hours after the first coat. In the case of a longer interim drying time, the entire surface must first be intermediate sanded. Can be walked on carefully 12 hours after the last sealing coat. After 24 hours approx. 80% of the durability has been achieved. After 7 days the full durability and chemical resistance of the product is provided (based on conditions of 20 °C, 50% relative humidity and sufficient ventilation) Low temperatures, high humidity and poor ventilation can extend the drying time. Furniture can be carefully put up again. Gliders/Protectors should be installed and maintained under all movable chairs, tables, fixtures and other furniture to protect the coating from abuse and unnecessary scratching. We recommend Dr. Schutz Scratch no more protectors.

Storage

Protect against frost. Store in a cool, dry place. Will keep for 12 months in unopened, original canister from the date of manufacture. Keep coating materials out of the reach of children.
When stored in varying temperatures and/or in an opened canister, dried parts can form. If so, sieve these out before using.

Notes:

– When mixed together, 2part-products can develop carbon dioxide and build up pressure. Never close 2part-mixtures tightly in a container, danger of bursting!
– Clean the working tools and implements with water. The hardened remains of lacquer can only be removed mechanically. We recommend always using new, dry Aquatop Rollers.
– Please pay attention to the printed batch number. Only use products with the same batch number in one layer. In the case of a different batch, mix this in a separate container before using.
– Coloured products (e.g. hair dyes, coloured disinfectants for wounds) as well as plasticizer migration (e.g. from rubber) can lead to the irreversible discoloration of the sealing coat. If resistance to hand and instrument disinfectants is required in specific buildings, we recommend pre-testing the respective chemicals on site. (*)
– Please pay attention: remove coloured products (hair dyes, wound disinfectants, etc.) as fast as possible from the sealer film. The longer aggressively colouring chemicals soak in, the sooner they can migrate and leave stains, which can sometimes no longer be completely removed, depending on the type of stain and the soak in time. Therefore treat stains immediately with Dr. Schutz Elatex / USR and proceed as follows: dab away fluid remnants of colour with absorbing cloths. Spray the stain with Dr. Schutz Elatex / USR, let it soak in for 5 minutes. Dissolve the stain with a soft cloth, dabbing from the edge into the centre of the stain. Do not rub. Rinse with clear water afterwards.

Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Learn more about Epoxy Warehouse

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.