ALKA 100 General Purpose Epoxy Primer-30kg

Description

Alka 100 – High-Performance 2-Component Epoxy Floor Primer

Alka 100 is a 2-component, high-solids epoxy system designed for use as a primer, bright & clear coat, or binder in epoxy mortar and pigmented slurry/broadcast systems. With excellent adhesion, penetration, and mechanical resistance, it is ideal for sealing, bonding, and protecting concrete surfaces in industrial and commercial settings

Where Can You Use Alka 100?

As a primer, penetrating sealer and bonding agent on:

• Cement renderings, asbestos cement.
• Timber.
• Subfill for floor levelling.
• Coving.
• As a bonding agent for: Epoxy mortar screeds, Epoxy self-levelling floor toppings, Mortar screeds.
• For impregnating and sealing cement-based floorings in Warehouses and stores, Warehouses and stores, Garages, Boiler rooms, Corridors.
• As a topcoat for interior decorative epoxy flooring finishes.

Advantages of Alka 100

• Extermely bright, clear and transparent.
• Suitable for use on dry and damp substrates.
• Excellent penetration and adhesion
• Low viscosity.
• Excellent bond strength.
• Easy application/Can be applied by brush or roller.
• Multi-purpose use.
• 100 % solids as supplied.
• Protects new concrete from abuse.
• Rejuvenates worn surfaces, to a smooth finish.
• Designed to take heavy loads.
• Available in bulk quantities.
• Good mechanical resistance.
• Good chemical resistance.
• Economical.
• Short waiting times before subsequent coatings.

Consumption

Approximately 0.2 – 0.3 kg/m2 (approx. 5m2/litre) per coat depending on substrate conditions. As a concrete sealer two coats are normally required to achieve a total thickness of 100 microns. Strongly absorbent or porous substrates require two primer coats with a waiting time between coats of minimum 12 hours, and maximum 36 hours.

Application Instructions

• Alka 100 can be applied by brush or roller.
• Recommended coating thickness is approximately 50 microns per coat.

Cleaning of Equipment

Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, It can only be removed mechanically.

Order Alka 100 Today!

Alka 100 is the ultimate epoxy floor primer and clear coat, ensuring strong adhesion, smooth finishes, and high durability for industrial flooring. Whether you’re sealing new concrete or rejuvenating old surfaces, Alka 100 offers excellent performance and versatility.

Order Now or contact Sydney Industrial Coatings for expert guidance on the best epoxy solutions for your project.

**Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator.**

Learn more about Epoxy Warehouse

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.