A & I Coatings Envirothane 8470 (E8470) 9L kit

Two Pack Water Borne Polyurethane Finish – Available in Colour or Clear. Request a Quote.

$435.00 inc GST

Quantity:

Description

Description

A & I Coatings ENVIROTHANE 8470 is a unique high-performance water borne two pack acrylic polyurethane for concrete and steel protection. It provides ease of use and VOC compliance and is suitable for brush, roller or spray application. This environmentally friendly fast drying coating has very good yellowing and UV resistance on exterior exposure and may be applied in conjunction with epoxy primer and intermediate coats to provide a durable, corrosion resistant coating system.

Uses

• External concrete coating

• Structural Steel

• Seamless flooring

• Masonry

• Carparks and Showrooms

• Shopping Centres

• Commercial Offices

• Retail

• Storage Facilities

Benefits

1. Exceptional colour retention properties

2. Suitable for brush, roller and spray application

3. Clear contains UV blockers for internal applications to protect the underlying coats.

4. Low VOC

5. Meets Greenstar requirements

6. User friendly

7. Low odour

Limitation

1. Available only in satin

2. Not to be applied below 10ºC and above 85% R.H.

3. Excessive film thickness could cause whitening when used as a clearcoat.

4. Not to be applied direct to concrete

5. Minimum surface temperature should be at least 3˚C above dew point at time of application and initial cure

Mixing Ratio

8 : 1 (Pack A : Pack B) by Volume

Coverage: 6.0 – 9.0m²/Litre @ 50 – 70μm(110 – 165μmWFT)

Please  read all product, technical and safety data sheets prior to application.

Contact Epoxy Warehouse For any inquiries .

 

 

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “A & I Coatings Envirothane 8470 (E8470) 9L kit”

Your email address will not be published. Required fields are marked *

Disclaimer

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

You may also like…