50mm Diamond Grinding Plugs | PCD

Description

PCD tapered plugs are used to remove coatings such as waterproofing membranes, thick epoxy resins, floor topping and a lot of thick glues. This was created to remove coatings from off the floor without creating heat build up thus reducing the chance of the coating becoming soft and gooey which makes it harder to remove.

• Two full round PCD for cutting action
• One PCD is the rider that keeps the cutters at the right height to prevent deep grooving or damage to the machine and floor.
• Top quality PCD diamond chips.
• Can remove coatings thicker than 1mm
• Cuts through the toughest coatings
• The two cutting PCDs can be heated with a welding torch and rotated to a expose a new edge

The 50mm grinding plug will suit the following brand floor grinding machines

• Satellite Machines made by Floorex
• DFG 480 Machines
• Scintex 480 Diamond Grinding machines made by Paddock

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.