Sikafloor Level Ultra – 20 KG

Description

Sikafloor® Level Ultra is a Fiber Reinforced Self Levelling Compound that can be applied on exterior or interior concrete substrates.

We are Sika’s Authorised Distributor and have access to all Sika’s products. Contact us for a free quote

USES of Sikafloor Level Ultra

Applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite® & Davco® ranges.

• Recommended underlayment for all Commercial & Domestic floor coverings
• Suitable to be applied prior to Sikafloor® epoxy or polyurethane colour coatings, in light to medium traffic areas (retail, commercial & car parks)
• Levelling of new or old concrete substrates

CHARACTERISTICS AND ADVANTAGES of Sikafloor Level Ultra

• Fiber reinforced
• Very Low VOC (~1 gram per litre)
• Green star certified
• High flexural strength
• High compressive strength
• Underfloor heating suitable
• Fast drying – Install tiles after 5-6hrs & moisture sensitive flooring after 7-8hrs @ 23°C
• Highly fluid with great self-healing properties
• Simply mix & apply – No slaking or re-mixing required
• Pump or manual application

PACKAGING

20kg Bag

Pallet = 48 bags

Sikafloor Level Ultra Datasheets

Sikafloor Level Ultra – Sika’s Website

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.