Sikafloor 264T AU full 9.7kg kit including 1 x Pigment Pack

Description

Sikafloor®-264T AU 10KG Kit Including Pigment Paste

Sikafloor 264T is a premium grade, 100% solids thixotropic, textured 2- component solvent free pigmented durable, a decorative finish designed to protect concrete floors and walls and offer seamless durable protection on floors and vertical surfaces.

Advantage of Sikafloor 264T Epoxy Resin

• Can be applied on vertical and horizontal surfaces
• Excellent resistance to whitening / blooming from early exposure to surface moisture
• Excellent chemical and mechanical resistance
• Excellent wear and abrasion resistance.
• Excellent fuel and chemical resistance.
• Easy application by brush and roller.
• Available in a wide range of colours to achieve an attractive & aesthetically pleasing finish.

Areas of use

• Automotive Workshops
• Pharmaceutical
• Cleanrooms – Laboratories
• Stadiums
• Correctional facilities
• Amenities, Washrooms
• Manufacturing facilities
• Carpark decks
• Schools
• Mechanical workshops
• Commercial kitchens

Sikafloor 264T Epoxy Packaging /Kit Size

Sikafloor264T 10Kg Kit Contains:
Part A: 6.55 kg
Part B:  2.0 kg
Pigment: 1.15 kg of Epoxy Pigment
PART A+ PART B + Pigment =  9.7Kg Or 7.3 Litres

Recommended Preparation Method

Preparation is the key to achieving a long-lasting floor-coating system

Diamond grinding is recommended method of preparing new & old substrates prior to applying Sikafloor 264T 10Kg Kit
The purpose behind concrete grinding is to remove any flaking paint and other types of contamination to achieve a clean surface as well as remove any sealer or curing agent and open concrete pores allowing 1^st coat of Sikafloor 160 to penetrate deep into the surface and seal the floor.

Acid Etching might be used as an alternative option to prepare the floor for more information on how to acid etch your floor click here to be directed to an external blog. Hydrochloric acid can be purchased from pool shops or local hardware stores

Recommended diamond tooling grits to prepare the floor prior to applying Sikafloor 264T 10Kg Kit

• 30/40 grit for hard concrete
• 80 Grit on soft concrete
• PCD plugs to remove flaking paint and then use grinding shoes to smooth out the floor before applying the coating.

Consumption Coverage Guide| 10kg pigmented kit applied using a 11 – 12 mm nap roller

Notes

• Please use the table above as a guide only, as the consumption could depend on the application method/style and porosity of the surface.
• Applying additional coats to the floors subject to heavy traffic is recommended
• Thin down the first coat by adding 5%- 7% of general-purpose thinners
• A slip-resistance surface covering can be achieved by adding anti-slip media

Guide to achieving R or P rated slip resistance floor covering using different grit anti-slip media

Document Download

Click on the tiles below to download Sikafloor®-264T Technical Data Sheets and Safety Data Sheets.

Sikafloor 264T au – Sika’s Website

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.